Long Arm Quilting: 

Most edge to edge patterns are .03 cents per square.

We offer an "edge-to-edge" or "all-over" machine quilting service.  The quilting design will start on one side of the quilt, quilting a repeat design across to the other side of the quilt.  This will repeat in rows down the length of your quilt.  Most quilting designs can be "nested" as to not actually see rows but a beautiful quilting design that stitches all the quilt layers together. 
This type of service does not allow for stopping or quilting around certain blocks, fabrics, or images.  We offer this quilting service as a way for you to get your quilt beautifully finished, without the struggles of machine quilting on your domestic home machine or having to crawl on the floor to baste your layers together.
To calculate the cost, multiply the width of your quilt by the length for your total square inches. Multiply that by .03 for an estimate. (This includes the Batting)

Quilt Preparation Checklist:
We will treat your quilt as our own, exercising our high standard of care and service.  We want you to be happy with your quilting design.  Please go through the checklist to be sure you have done everything necessary to enable us to do the best job possible with your quilt.  Understand that machine quilting will not “fix” fullness, puckering, poor sewing, inadequate seam allowance, improperly measured borders, or the squareness of your quilt, etc.

1. In order to properly load your quilt onto our long arm quilting machines, your backing must be a minimum of 4" larger on all four sides than the pieced quilt top.  Maximum width for our largest machine is 144".  (We do not accept bed sheets or blankets as a backing fabric.)
2. All threads must be trimmed
3. Quilt top and backing must be flat and well pressed; any embroidery or applique must lay flat without loose fabric or threads, no embellishments (buttons, sequins, pins), no loose fabric, etc.
4. If the quilt top or backing is directional, please indicate with a pinned note.